SteelPro™ SP24

Sectional Ribbed Doors

SteelPro™ SP24

Sectional Ribbed Doors

The SP24 combines 2" thick construction, 24 gauge steel and optional insulation, offering reliable performance for a wide range of commercial applications. As the most versatile model in the SteelPro Series, it provides the broadest selection of options, sizes, and colors, including Taupe, Brown, Black and ColorWave™, to meet varying project needs.

GET A FREE QUOTE
SteelPro™ SP24

Colors

SteelPro SP24

White
Taupe
Brown
Black

>>Colors displayed on monitors, mobile devices, and printed materials will vary from the actual steel color. Contact your local Raynor Authorized Dealer for color samples.

Optional Post Paint Process*

Raynor’s ColorWave™ features Sherwin-Williams® next-generation post paint system for your garage door. With 1,500 colors to choose from, home and business owners can couple this elite paint system with state-of-the-art Raynor manufacturing to craft the perfect look for their home or project.

* Not all colors are available in solar reflective paint, colors that are not available as solar reflective cannot be used on polyurethane doors.

Product Details

Door
Type Commercial Sectional Garage Doors
Model SteelPro SP24
Size 32’ x 24’ Max
Operation Manual, Motor, or Hand Chain
IECC Thermal Performance N/A
Sections
Construction 1 or 2 Layer Pan
Material Steel
Surface Texture Smooth Ribbed Exterior
Section Joint Tongue-in-Groove
Section Thickness 2″
Gauge Steel; Exterior: 24 Gauge (All Colors)
Stiles End Stiles: 16 or 18 Gauge (Depending on Door Width); Center Stiles: 18 Gauge
Insulation Optional Expanded Polystyrene (6.8 R-Value) with 26 Gauge Steel Covers
Seals Bottom Seal (3” black); Optional Header Seal
Trussing Wind Load: 15 P.S.F Tested/ 10 P.S.F. Design Load (Standard); Material: U-bar (18 Gauge or 20 Gauge)
Panel Configuration NA
Color White, Brown, Taupe, Black, Raynor ColorWave™ Optional Post Paint Process with 1,500 Sherwin-Williams® Colors
Windows 24" x 6", 25" x 12" or Fullview Section; Glass: Choose From a Variety of Standard or Insulated Glass, or Polycarbonate Styles to Suit Any Application
Track
Type Normal headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options
Finish Galvanized or Optional White Powder Coat
Size 2” or 3”
Gauge 12, 13, 16 Gauge
Counterbalance System
Type Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance
Springs Spring Inner Diameter: 2-1/4", 3-1/2" or 5-1/2"; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat
Shafts Tube (13 Gauge) or Solid (D-Shaft, 1" Keyed, 1-1/4" Keyed)
Hardware/Accessories
Hinges 11, 13, 14 Gauge
Rollers Standard (2" or 3") or Heavy Duty (2" or 3")
Finish Galvanized
Lock Interior Slide Lock, Exterior Lock Bars, Auto-latch Lock, and Mini-warehouse Lock
Seal(s) Climate Seal
Hanger Angle 11, 13, 16 Gauge Galvanized or 13 Gauge White Powder Coated
Pedestrian Door NA
Optional Wind Loading Certified Wind Load Available
Posts Swing-Up

Specs / Drawings

Select a link below to download Raynor SteelPro SP24 specifications and drawings.

Word PDF Drawings
SP24 Product Specs DOCX PDF
Full Sectional Product Line Specs DOCX PDF
BIM Objects DOCX PDF

Technical Information

Section and Panel Schedules

Door Width Number of Panels
Up to 9’2” 2
9’3” to 12’2” 3
12’3” to 16’2” 4
16’3” to 20’2” 5
20’3” to 24’2” 6
24’3” to 28’2” 8
28’3” to 32’2” 10
Door Height Number of Sections
Up to 8’0” 4
8’1” to 10’0” 5
10’1” to 12’0” 6
12’1” to 14’0” 7
14’1” to 16’0” 8
16’1” to 18’0” 9
18’1” to 20’0” 10
20’1” to 22’0” 11
22’1” to 24’0” 12

Product Literature

SteelPro “SP” Series Warranty

Door Sections:

Raynor® warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

Hardware:

Raynor® warrants all hardware against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

Springs:

Raynor® warrants springs against defects in material and workmanship for one (1) year from date of delivery. The limited warranty for special high-cycle springs is prorated by percentage of cycle use, and must be determined by the use of a non-resettable cycle counter.

ColorWave™ Paint System:

Raynor provides a five-year warranty for the ColorWave Paint System (exterior only) against chipping, cracking, and peeling (loss of adhesion) from the date of delivery to the original purchaser. This warranty covers defects in materials and workmanship under normal use and proper maintenance. Please note that fading, as well as chipping, cracking, or peeling caused by dents or scratches, are not included in this coverage. Additionally, for doors made with polyurethane insulation, a solar reflective paint formulation is required to maintain the warranty. Ordering a color that does not meet this requirement will void the warranty for the ColorWave Paint System. Field applied paint is not covered by this warranty. This warranty applies only to the original purchaser and may be subject to inspection before approval of any claim.

Warranty Limitations and Exclusions:

Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by an qualified installer. This warranty applies only to door systems that are professionally installed by an authorized Raynor Dealer.

This limited warranty extends only to the original purchaser, provided the door is installed in the original purchaser’s place of business. This limited warranty is not transferable.

This limited warranty does not apply to black, charcoal, slate, and iron ore steel colors used on Raynor EnergyCore series, ThermaSeal Series, Commercial Country Manor and Commercial Aspen series doors when installed in areas experiencing extreme heat for prolonged periods of time. The result of these environmental conditions can elicit a failure of the polyurethane core of the door. The warranty also excludes doors which have been field painted where the paint does not include a solar reflective additive.

This limited warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. It also does not apply to damage or deterioration caused by saltwater coastal areas, hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this limited warranty. Field applied paint failure is not covered by this limited warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.

This limited warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this limited warranty.

This limited warranty does not apply to building damage caused by moisture infiltration through or around the door. A garage door system is water resistant, but not waterproof. When a garage door system is properly assembled, installed, and maintained the risk of significant water infiltration is low.

Raynor shall not be liable for any consequential or incidental damages.

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED.

Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.

Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Colors

SteelPro SP24

White
Taupe
Brown
Black

>>Colors displayed on monitors, mobile devices, and printed materials will vary from the actual steel color. Contact your local Raynor Authorized Dealer for color samples.

Optional Post Paint Process*

Raynor’s ColorWave™ features Sherwin-Williams® next-generation post paint system for your garage door. With 1,500 colors to choose from, home and business owners can couple this elite paint system with state-of-the-art Raynor manufacturing to craft the perfect look for their home or project.

* Not all colors are available in solar reflective paint, colors that are not available as solar reflective cannot be used on polyurethane doors.

Product Details

Door
Type Commercial Sectional Garage Doors
Model SteelPro SP24
Size 32’ x 24’ Max
Operation Manual, Motor, or Hand Chain
IECC Thermal Performance N/A
Sections
Construction 1 or 2 Layer Pan
Material Steel
Surface Texture Smooth Ribbed Exterior
Section Joint Tongue-in-Groove
Section Thickness 2″
Gauge Steel; Exterior: 24 Gauge (All Colors)
Stiles End Stiles: 16 or 18 Gauge (Depending on Door Width); Center Stiles: 18 Gauge
Insulation Optional Expanded Polystyrene (6.8 R-Value) with 26 Gauge Steel Covers
Seals Bottom Seal (3” black); Optional Header Seal
Trussing Wind Load: 15 P.S.F Tested/ 10 P.S.F. Design Load (Standard); Material: U-bar (18 Gauge or 20 Gauge)
Panel Configuration NA
Color White, Brown, Taupe, Black, Raynor ColorWave™ Optional Post Paint Process with 1,500 Sherwin-Williams® Colors
Windows 24" x 6", 25" x 12" or Fullview Section; Glass: Choose From a Variety of Standard or Insulated Glass, or Polycarbonate Styles to Suit Any Application
Track
Type Normal headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options
Finish Galvanized or Optional White Powder Coat
Size 2” or 3”
Gauge 12, 13, 16 Gauge
Counterbalance System
Type Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance
Springs Spring Inner Diameter: 2-1/4", 3-1/2" or 5-1/2"; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat
Shafts Tube (13 Gauge) or Solid (D-Shaft, 1" Keyed, 1-1/4" Keyed)
Hardware/Accessories
Hinges 11, 13, 14 Gauge
Rollers Standard (2" or 3") or Heavy Duty (2" or 3")
Finish Galvanized
Lock Interior Slide Lock, Exterior Lock Bars, Auto-latch Lock, and Mini-warehouse Lock
Seal(s) Climate Seal
Hanger Angle 11, 13, 16 Gauge Galvanized or 13 Gauge White Powder Coated
Pedestrian Door NA
Optional Wind Loading Certified Wind Load Available
Posts Swing-Up

Specs / Drawings

Select a link below to download Raynor SteelPro SP24 specifications and drawings.

Word PDF Drawings
SP24 Product Specs DOCX PDF
Full Sectional Product Line Specs DOCX PDF
BIM Objects DOCX PDF

Technical Information

Section and Panel Schedules

Door Width Number of Panels
Up to 9’2” 2
9’3” to 12’2” 3
12’3” to 16’2” 4
16’3” to 20’2” 5
20’3” to 24’2” 6
24’3” to 28’2” 8
28’3” to 32’2” 10
Door Height Number of Sections
Up to 8’0” 4
8’1” to 10’0” 5
10’1” to 12’0” 6
12’1” to 14’0” 7
14’1” to 16’0” 8
16’1” to 18’0” 9
18’1” to 20’0” 10
20’1” to 22’0” 11
22’1” to 24’0” 12

Product Literature

SteelPro “SP” Series Warranty

Door Sections:

Raynor® warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

Hardware:

Raynor® warrants all hardware against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

Springs:

Raynor® warrants springs against defects in material and workmanship for one (1) year from date of delivery. The limited warranty for special high-cycle springs is prorated by percentage of cycle use, and must be determined by the use of a non-resettable cycle counter.

ColorWave™ Paint System:

Raynor provides a five-year warranty for the ColorWave Paint System (exterior only) against chipping, cracking, and peeling (loss of adhesion) from the date of delivery to the original purchaser. This warranty covers defects in materials and workmanship under normal use and proper maintenance. Please note that fading, as well as chipping, cracking, or peeling caused by dents or scratches, are not included in this coverage. Additionally, for doors made with polyurethane insulation, a solar reflective paint formulation is required to maintain the warranty. Ordering a color that does not meet this requirement will void the warranty for the ColorWave Paint System. Field applied paint is not covered by this warranty. This warranty applies only to the original purchaser and may be subject to inspection before approval of any claim.

Warranty Limitations and Exclusions:

Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by an qualified installer. This warranty applies only to door systems that are professionally installed by an authorized Raynor Dealer.

This limited warranty extends only to the original purchaser, provided the door is installed in the original purchaser’s place of business. This limited warranty is not transferable.

This limited warranty does not apply to black, charcoal, slate, and iron ore steel colors used on Raynor EnergyCore series, ThermaSeal Series, Commercial Country Manor and Commercial Aspen series doors when installed in areas experiencing extreme heat for prolonged periods of time. The result of these environmental conditions can elicit a failure of the polyurethane core of the door. The warranty also excludes doors which have been field painted where the paint does not include a solar reflective additive.

This limited warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. It also does not apply to damage or deterioration caused by saltwater coastal areas, hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this limited warranty. Field applied paint failure is not covered by this limited warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.

This limited warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this limited warranty.

This limited warranty does not apply to building damage caused by moisture infiltration through or around the door. A garage door system is water resistant, but not waterproof. When a garage door system is properly assembled, installed, and maintained the risk of significant water infiltration is low.

Raynor shall not be liable for any consequential or incidental damages.

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED.

Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.

Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

SP24 Features and Options

Raynor SteelPro SP24 sectional ribbed commercial doors are available with numerous features and options, including those listed below.

QuickDock™ Solution

Raynor’s patent pending QuickDock is engineered to decrease downtime and increase safety during repairs and maintenance. It comes complete with preassembled, palletized sections and the counterbalance assembly is mounted only 16” above the header. QuickDock is available on orders of 36 doors or more.

Durable Construction

Roll-formed tongue-and-groove rails provide excellent structural integrity, SP20, SP24 and SP24C doors are built to withstand heavy use.

Rugged Hardware and Springs

Your SteelPro door comes packaged with the right combination of hardware, track and springs to precisely match your door’s size and application and provides years of reliable service.

Decreased Energy Costs

SteelPro doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.

Ribbed Sections

Ribbed Sections Ribbed sections add strength to the door by making a firm connection between the outer steel and the mutts/end stiles.

Header Seal

Two header seal options are available on all SteelPro models. These header seals greatly reduce air infiltration and energy costs by sealing the top of the door against the header.

Section Joint Seal

SteelPro doors are available with a neoprene foam rubber section joint seal to help prevent airflow between sections.

Jamb Seal

Jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed. Available in EPDM rubber or flexible vinyl flap.

Insulation

Doors are available with energy-saving insulation. Choose from white impact-resistant (shown) or steel (26 gauge) back covers.

EnduraCote™

The EnduraCote hardware system comes with springs, track and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.

Customized Track and Hardware

Track systems are supplied to fit special clearances, inclines or contour applications. Hardware and track systems can be designed to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.

Choice of Windows

Windows are available in your choice of either 24”x6” (top photo), 25”x12”, or in full-view aluminum intermediate sections (bottom photo). Impact-rated, full-view aluminum sections are also available to protect in high-wind events.

High-cycle Counterbalance System

For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000; 50,000 or 100,000 cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.

Locks

In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.

Removable Center Posts

A swing-up post is available for extra-wide openings, and is Ideal for agricultural or airplane hangar applications.

Carbon Monoxide Vent

Allows you to channel fumes to the outside when door is closed. Available in a variety of sizes.

QuickDock™ Solution

Raynor’s patent pending QuickDock is engineered to decrease downtime and increase safety during repairs and maintenance. It comes complete with preassembled, palletized sections and the counterbalance assembly is mounted only 16” above the header. QuickDock is available on orders of 36 doors or more.

Durable Construction

Roll-formed tongue-and-groove rails provide excellent structural integrity, SP20, SP24 and SP24C doors are built to withstand heavy use.

Rugged Hardware and Springs

Your SteelPro door comes packaged with the right combination of hardware, track and springs to precisely match your door’s size and application and provides years of reliable service.

Decreased Energy Costs

SteelPro doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.

Ribbed Sections

Ribbed Sections Ribbed sections add strength to the door by making a firm connection between the outer steel and the mutts/end stiles.

Header Seal

Two header seal options are available on all SteelPro models. These header seals greatly reduce air infiltration and energy costs by sealing the top of the door against the header.

Section Joint Seal

SteelPro doors are available with a neoprene foam rubber section joint seal to help prevent airflow between sections.

Jamb Seal

Jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed. Available in EPDM rubber or flexible vinyl flap.

Insulation

Doors are available with energy-saving insulation. Choose from white impact-resistant (shown) or steel (26 gauge) back covers.

EnduraCote™

The EnduraCote hardware system comes with springs, track and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.

Customized Track and Hardware

Track systems are supplied to fit special clearances, inclines or contour applications. Hardware and track systems can be designed to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.

Choice of Windows

Windows are available in your choice of either 24”x6” (top photo), 25”x12”, or in full-view aluminum intermediate sections (bottom photo). Impact-rated, full-view aluminum sections are also available to protect in high-wind events.

High-cycle Counterbalance System

For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000; 50,000 or 100,000 cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.

Locks

In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.

Removable Center Posts

A swing-up post is available for extra-wide openings, and is Ideal for agricultural or airplane hangar applications.

Carbon Monoxide Vent

Allows you to channel fumes to the outside when door is closed. Available in a variety of sizes.

Design Center

Customize your garage door!

Build the garage door of your dreams with our design center. Quickly scroll through our wide range of models, styles, and options, and request a quote in a matter of minutes.

DESIGN NOW!

Get a Free Quote

Contact Us for a Free Estimate

(402) 462-4103
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
Warren Garage Door Client
× Popup Image